The machine is new mixer, that because of high-efficiency and precsion. Its suitable for mixing the powder state materials in the pharmacy, chemical, food, instant soluble and other industries.
    The machine structure is rational and its external appearance is beautiful. All the sections of contacting the materials use the stainless steel.

 The mixer/mixing machine/mixing equipment barrel of the machine moves in multi-direction. For the materials, there is no centrifugal function, without the specific gravity segregation and the layer division. For each of build-up phenomenon, there is the remarkable weight rate. The mixing rate is up to 99.9%. The machine is the desired product in various mixers at present.
    The barrel material charge rate is big. Maximum rate can be up to 90%(the common mixer has only 40% charge rate). It is high in efficiency and short in the mixing time.
    The barrel uses the curve connection. The barrel has passed the fine polish treatment. The machine is used for mixing the powder state and grain state materials with the high uniformity in the pharmacy, chemical, food, high-industry, electronic, mechanical, metallurgical, nation defence industries and other science and lechnology institutes.
 

 EYHTwoDimensional Mixer/Mixing machine/Mixing equipment mainly consists of three big parts, namely, rotating cylinder, swinging rack and frame. The rotating cylinder lies on the swinging rack, supported by four whets and its axial fixation is done by two stop wheels. Two of four wheels are driven by rotating power system to make the cylinder rotate. The swinging rack is driven by a set of crankshaft swinging bar which is mounted on the frame and the swinging rack is supported on the frame.

 CH type mixer/mixing machine/mixing equipment is wide used for mixing powder or wet raw materials and can make the main and auxiliary raw materials with different proportion uniform. The places where the raw materials contact are made from stainless steel. The gap between blades is small and there is no dead corner in mixing. At the ends of stirring shaft, there are seal devices. It can prevent from the raw materials rushing out. It is wide used for pharmaceutical, chemical, foodstuff and so on industries.

Applicati

for mixing the powder and grain state materials in the pharmacy, chemical food, building material and other industries.

Principle:

Through the vacuum conveyor for the machine, send the powder or grain state materials into the double-taper container, or send the materials into the container manually. As the container rotates continuously, the materials moves complexly in the container so as to get the uniform mixing.

Advanced technology and high configuration, we have exported our products to many countries and establish several turnkey projects in Russia, Argentina, Burma, Vietnam,  Uzbekistan etc.

Series Rotary Tablet press machine model ZP1100 is a new generation products. There are all four types. It is economical High-Speed Tablets. It can be produced all types of round tablets, irregular tablets and tablets of engraved on double sides.

The characteristics of ZP1100 series are meeting GMP requirement. The design of ZP1100 series is reasonable. It is easy for operation. Cleaning and changing products.

The production capacity is large and the quality of production is better. It has pre-pressure de-vice so that the time of pres-sure can be delayed. The speed of turret is high. The linear velocity is up to requirement of High Speed Tablet Press machine. The controller is PLC. The showing screen can be shown and set up each of technology. Controlling parameter, each of breakdown and fixing way.

It can be shown average working pressure of tablets through the showing screen so that the operator can judge the quality of tablets and can adjust the weight of tablets in time. At the same time, it can be set up the Max. working pres-sure too. When the actual pressure exceeds the setting up numeral value, the machine can be automatic stopped urgently. So that it is safe.

The series machines have protective device for upper punches broken. When the upper punches are broken, the machine can be stopped urgently by automatic electric control.

This machine is designed for pressing round tablets from various granular materials,
applicable to lab used for research and development and to small-scale production.
As its feature, it is a small desk-top continuous press driven by motor or man-power.
Only one set of punch and die is mounted, the depth of the filling material
and the thickness of the tablets can be adjusted.

This machine is not only applicable to the pharmaceutical industry, but also to

other sectors such as chemical, foodstuff and electronic industries (except

explosive, inflammable or corrosive materials. Those articles are not permitted

to enter this machine). The machine can be used to press various granular

materials that meet the requirements for tablet into tablets. The machine is

applicable for pressing round tablets, shaped and double-sided letter-engraved

tablets. The machine is not suitable for semi-solid, damp, hygroscopic and

non-granular powder materials.

This machine is drsigned for pressing round, geometrical shape, circular tablets, applicable to pesticide, chemical industries, metallurgy and food industries ect. It can press big specification tablets and difficult forming tablets.

Characteristic:

 

The machine apply with under under rotary style single punch tablets press patent technology, having big press, good forming, stable operation, no groundwork, saving energy and can also press manually etc. And it is equipped with press display and superload protection device.