HY-A4 blow molding machine is the most stable two-step automatic stretch
blow molding machine. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PC,PP.

HY-A4 blow molding machine Settings:
1) PLC color display: SIEMENS (GERMANY)
2) Pneumatic parts: FESTO (Germany)
3) Other electric parts are all world-famous brand

The 2L double station blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of DHD-2L,DHD-5L,DHD-10L and DHD-16L. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.The Machine Can Produce all kinds of  PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.


Setting:
Clamping------------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system----------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic

Automaic wide neck bottle blowing machine
 
1. Control system adopts import Germany SIEMENS PLC.
2.  High-pressure winds valve adopts Switzerland import Parker high-pressure winds valve(blow system set two times blowing).
3.  Movement valve adopts Korea DKC quicken 5/2 way 1/4 electromagnetic valve.
4. Thansmission chain adopts Taiwan brand KMC chain.
5. Cylinder adopts Germany FESTO cylinder.
6. There arrange 10 pieces of lamp tube on the vertical direction of heating part.
7. Temperature control system is the third generation of intelligent energy-saving power-regulation implement, Silicon-controlled rectifier using Japan SANPEX products.
8. Stretch seal cylinder adopts Korea combined cylinder.
9. Die-mould stucture adopts high-speed machine hinge structure,all is made by nodular cast iron
10. ALL kinds of rotationrevolution bearing of the machine use Switzerland SKF brand products.
11. Chain support bearing use Japan NSK brand products.
12. All of the electronic sensors of the machine use Korea AUTONICS brand products.

Technical characteristic

PLC + touch screen, making the operation easy. Automatic malfunction alarm with self diagnosis, making the malfunction is clear at a glance
Center input die head, eliminating the knit line completely and making it easy to change the material color.
Double bar horizontal motion structure in moving, opening and closing mold, making the clamping force equally distributed, so the cut is smoother.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the product purity
High production and energy-saving, suitable for mass production.

blow molding machine 30L

model:YJBA80-30L

automatic hydraulic extrusion blow molding machine

screw diameter:80mm    max. volume:30L

accumulator die head,with parison control system

special clamping structure --energy saving

Japan PLC and temperature module

Taiwan touch screen(full color,bilingual)

Excellent hydraulic and phneumatic valve



Technical characteristic


1. PLC plus man-machine interface, operate by touch screen. Self-diagnosis alarm and clear at a glance.


2. Accumulator die head whose runner is made by high-quality nitride alloy steel with mirror surface treatment, material and color quick reload.


3. Unique " three tie bar +three cylinder + linear guide" structure of the clamping structure to ensure a more uniform mode-lock, knit line more smooth


4. Hydraulic system designed under energy-saving hydraulic principles, lower energy consumption by 20% -40% compared with the conventional model. At the same time, a significant reduction in oil temperature extends the service life of hydraulic parts.


5. Variety of functions for different products matching the technological requirements: bottom blow and lift, rotation, encapsulation, material support, sub-mould, robot, parison control system, etc.

6. internal thread, angle thread

PET Blow Molding Machine

Hisson HB-M400,HB-M800 machine are the type of two stage stretch blow molding machine, specially designed for PET bottle blow molding. Each set of our machine includes one set of preform infrared heating oven and one set of bottle blow molding part. HB-M800 is suitable for blowing the bottle up to 2L with 2-cavity blow mold;HB-M400 is suitable for blowing the bottle up to 6L with 1-cavity blow mold.


Main Features

1. Separation type design, small occupied space, low investment cost.

2. Running with high precision, stable and quiet.

3. Electric elements are adopted worldwide famous brand.

4. You can adjust the mechanical system according to different condition.

5. Fully controlled by computer, manual operation and auto operation are optional.

6. Heating oven can be adjusted aiming at specific condition.

7. With excellent stable-temperature-holding system

8. Adjustable revolution speed

9. Low power consumption and high safety

Detailed Product Description

auto blow molding machine

Main Features

1.Auto falt alarm,advanced security device

2.Auto preform loading,for widespread bottles

3.apanese MITSUBISHI PLC

4.Combined with European technique, famous brand components


Techinical Parameters

CM-A1 full automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.It is widely used to produce the carbonated bottle,mineral water bottle,pesticide bottle,oil bottle,cosmetics bottle,wide-mouth bottle and hot fill bottle ect.

*Reasonable design,full automatic control,save power and labor.Adopt high quality conponents.
*Feeding system carries the preform by robot automatically.
*Infrared oven heater adopts the quartz lamp to heat the PET tube.
*Fully automatic process with low investment,high efficiency,quick and safe opration,easy for trouble-shooting,maintenance and other benefits.
*We have the perfect service after sales.

Mian parameter:
Model                             CM-A1
Output(depend on bottle design)   800-1200 pcs/h
productivity                      PET
Volume                            0.1-2L
Height                            <=310mm
Body diameter                     <=100mm
Neck diameter                     18-38mm
Rated Power                       25kw
Electrical source power           380V/220V 3Phase 50/60HZ
Really use power                  4kw
cooling                           3HP
Cavity                            1

Note:All of the electrical components adopts CE,UL,CCC aproved international advanced high-tech product.

CM-A1 full automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.It is widely used to produce the carbonated bottle,mineral water bottle,pesticide bottle,oil bottle,cosmetics bottle,wide-mouth bottle and hot fill bottle ect.

*Reasonable design,full automatic control,save power and labor.Adopt high quality conponents.
*Feeding system carries the preform by robot automatically.
*Infrared oven heater adopts the quartz lamp to heat the PET tube.
*Fully automatic process with low investment,high efficiency,quick and safe opration,easy for trouble-shooting,maintenance and other benefits.
*We have the perfect service after sales.

Mian parameter:
Model                             CM-A1
Output(depend on bottle design)   800-1200 pcs/h
productivity                      PET
Volume                            0.1-2L
Height                            <=310mm
Body diameter                     <=100mm
Neck diameter                     18-38mm
Rated Power                       25kw
Electrical source power           380V/220V 3Phase 50/60HZ
Really use power                  4kw
cooling                           3HP
Cavity                            1

Note:All of the electrical components adopts CE,UL,CCC aproved international advanced high-tech product.

CM-A2 full automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.It is widely used to produce the carbonated bottle,mineral water bottle,pesticide bottle,oil bottle,cosmetics bottle,wide-mouth bottle and hot fill bottle ect.

*Reasonable design,full automatic control,save power and labor.Adopt high quality conponents.
*Feeding system carries the preform by robot automatically.
*Infrared oven heater adopts the quartz lamp to heat the PET tube.
*Fully automatic process with low investment,high efficiency,quick and safe opration,easy for trouble-shooting,maintenance and other benefits.
*We have the perfect service after sales.

Main parameter
Model                                  CM-A2
output(depend on bottle design)        1800-2000 pcs/h
Volume                                 0.1-2L
Body diameter                          <=100mm
Height                                 <=310mm
Neck diameter                          18-38mm
Cavity                                 2 cavity
Mould size                             370*240*320mm
Electrical source power                380V/220V 3Phase 50/60 HZ
Rated power                            25 kw
Really use power                       5 kw
Resin available                        PET
                  
Note:All of the electrical components adopts CE,UL,CCC aproved international advanced high-tech product.