After coating treatment, the aluminum belt material is beautiful outsurface and generous, wildly use for juice container, coating shapingplate, metallic furniture, household electrical appliances, foodpackage, communications and transport and building industrial, more andmore intimate in daily life, and quality requirements of coating isbecome more higher, so the aluminum belt material factories in abroadare established the coating production line in progression with higherquality. The highest speed of the production line can reach 365m/min,width of belt material is 300~1880mm, and own some proprietarytechnology: single slipway roller coat, powder coating technology,coating machine and control system, welding and drying system,suspended welding oven,etc.the main equipments are include entrance andexit equipment,purifier,inaction equipment with traditional method(dryand action on site),primary coating machine, precise coating machine,decorating machine, welding oven, incineration system, gas cooling andwater cooling tank, cool/hot film, embossing machine, automationprocess system, and so on.
Scope of adjustment Raw material: Aluminum coil
Weight of raw material aluminum coil: max8000kg/coil (weight at decoiling)
Weight of final aluminum coil: max 6000kg/coil (weight at coiling)
Inner diameter of aluminum coil: Φ508mmorΦ610mm
Outer diameter of the aluminum coil : outer diameter at decoiling: Φ800∼Φ1600 mm,
outer diameter at coiling : Φ800∼Φ1600 mm
Thickness of raw aluminum plate: 0.102.5mm (choose thickness within this range according
to customers requirement)
Width of aluminum plate: ≤1800 mm (choose width within this range according to
customers requirement)
Line speed: 10~80mm/min (polyester); (choose line speed within this range according to
customers requirement) 15~40mm/min (pvdf); (choose line speed within this range
according to customers requirement)
Energy: electric, natural gas, diesel oil, liquefied gas, propane (pressure force: 50100Mbar)
(choose energy type according to the local energy requirement of customers)
Roller coating process: coating: continuous twice coating and drying on top side or both
sides (laminated film system can be chosen: dry film laminating)
Thickness of color coating: thickness of dry film on base coating can be 8~10μm(wet film is
about 15~20μm ). Thickness of dry film on top coating can be10~20μm(wet film is 20~40μm ).
Normal Coil coating: polyester, silicium changed polyester, polyurethane, epoxy, alkyd resin,
acrylic resin, solution-type acrylic resin, PVC, polyvinylidene.pvdf,etc.
Geology conditions: 0~500 above sea level; temperature of environment: 0~56
Relative moisture: Max. 90, Min. 15
